 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Antenna, Sensor, and Communications Trunk Line Connections GT17 Series -- Ideal as Automotive USB Connectors -- <2 mm pitch> Features All surface shielded construction. Ideal for use as Automotive USB connectors. Applications In-car data communications, etc. 99 F Connectors Center Terminals (Used with 6, 8, and 10 conductor cable) Part Number GT17-2022SCF GT17-2428SCF GT17-30SCF CL No. 767-0009-0 767-0010-0 767-0064-9 Material Copper alloy Copper alloy Copper alloy Finish Tin plating Tin plating Tin plating Conductor Size (AWG) #20 to 22 #24 to 28 #30 Outer Diameter 1.1 to 1.3 mm 0.7 to 1.0 mm 1.1 to 1.3 mm Packaging 10,000 pcs. per reel 10,000 pcs. per reel 10,000 pcs. per reel F Connectors (6-Conductor Type) Insulator Contact No.1 Contact No.3 Contact No.4 Contact No.6 Part Number CL No. Material Color Packaging GT17V-6DS-2C 767-0026-0 PBT Dark gray 1 Note: Applicable Cable will have an Insulator diameter of 0.7 to 1.3 mm. Outer terminals Part Number GT17V-6DS-5CF CL No. 767-0027-2 Material Copper alloy Finish Tin plating Outer Diameter 4.8 to 5.2 mm Packaging 1 100 Note: The crimping conditions will differ depending on the construction and material of the cable. In view of this, please make arrangements to ascertain whether crimping is possible for each cable. Shield Cover Part Number GT17V-6DS-SC CL No. 767-0028-5 Material Copper alloy Finish Tin plating Packaging 1 Housing BShown with inserted retainer GT17V-6DS-HU GT17VA-6DS-HU Key Configuration Key Configuration Part Number GT17V-6DS-HU GT17VA-6DS-HU CL No. 767-0029-8 767-0030-7 Material PBT PBT Color Light gray Black Key Configurations 1 2 Packaging 1 1 Note 1: Used with the separate retainer (GT17V-6DS-R). Note 2: Applicable Cable will have an outside sheath diameter of 4.8 to 5.2 mm. 101 Retainer (Used with GT17V-6DS-HU and GT17VA-6DS-HU) Part Number GT17V- 6DS -R CL No. 767- 0031-0 Material PBT Color Dark gray Packaging 1 Note: Applicable Cable will have an Insulator diameter of 4.8 to 5.2 mm. BF Connector (6-Conductor Type) Composition Table Inner Terminal GT17-2022SCF GT17-2428SCF GT17-30SCF Insulator GT17V-6DS-2C Outer Terminal GT17V-6DS-5CF Shield Cover GT17V-6DS-SC GT17VA- 6DS-HU Housing GT17V- 6DS-HU GT17V-6DS-R Retainer B6-Conductor Type Mating Table F Connector GT17V-6DS-HU GT17VA-6DS-HU M Connector GT17V-6DP-DS GT17VB-6DP-DS GT17VA-6DP-DS GT17VC-6DP-DS Color Light gray Black 102 M Connectors (6-Conductor Type) Printed Circuit Board Type GT17V-6DP-DS GT17VA- 6DP-DS BPanel Insertion Portion Dimensions Key Configuration Key Configuration BMounted and fully mated connector assemblies BRecommended PCB Mounting Pattern BRecommended Panel Cut-out Board Panel Panel Board Board Part Number GT17V-6DP-DS GT17VA-6DP-DS CL No. 767-0024-4 767-0025-7 Material Brass (Center terminal) Copper alloy (Outer terminals) PBT (Housing) Color Light gray Black Key Configurations Direction of Cable Pull-off 1 2 Upward with respect to the mounting surface Packaging 1 1 103 GT17VB-6DP-DS GT17VC-6DP-DS BPanel Insertion Portion Dimensions Key Configuration Key Configuration BMounted and fully mated connector assemblies BRecommended PCB Mounting Pattern BRecommended Panel Cut-out Board Panel Board Panel Board Part Number GT17VB-6DP-DS GT17VC-6DP-DS CL No. 767-0032-2 767-0033-5 Material Brass (Center terminal) Copper alloy (Outer terminals) PBT (Housing) Color Light gray Black Key Configurations Direction of Cable Pull-off 3 4 Downward with respect to the mounting surface Packaging 1 1 104 F Connectors (8-Conductor Type) Insulator Part Number CL No. Material Color Packaging GT17-8DS-2C 767-0005-0 PBT Dark gray 1 Note: Applicable Cable will have an Insulator diameter of 0.7 to 1.3 mm. Outer terminals Part Number CL No. Material Finish Outer Diameter Packaging GT17-8DS-7CF 767-0007-5 Tin plating 6.8 to 7.2 mm 1 Phosphor bronze Note: The crimping conditions will differ depending on the construction and material of the cable. In view of this, please make arrangements to ascertain whether crimping is possible for each cable. Shield Cover Part Number GT17-8DS-SC CL No. 767-0006-2 Material Brass Finish Tin plating Packaging 1 105 Housing BShown with inserted retainer GT17-8DS-HU GT17A-8DS-HU Key Configuration Key Configuration Part Number CL No. Material Color Key Configurations 1 GT17-8DS-HU 767-0003-4 PBT Light gray 2 GT17A-8DS-HU 767-0004-7 PBT Black Note 1: Used with the separate retainer (GT17-8DS-R). Note 2: Applicable Cable will have an outside sheath diameter of 6.8 to 7.2 mm. Packaging 1 1 Retainer Packaging Part Number CL No. Material Color GT17-8DS-R 767-0008-8 PBT Dark gray 1 Note: Applicable Cables will have an outside sheath diameter of 6.8 to 7.2 mm. 106 BF Connector (8-Conductor Type) Composition Table Inner Terminal GT17-2022SCF GT17-2428SCF GT17-30SCF Insulator Outer Terminal Shield Cover Housing GT17-8DS-HU GT17-8DS-2C GT17-8DS-7CF GT17-8DS-SC GT17A-8DS-HU GT17-8DS-R Retainer B8-Conductor Type Mating Table F Connector GT17-8DS-HU GT17A-8DS-HU M Connector GT17-8DP-DS GT17B-8DP-DS GT17A-8DP-DS GT17C-8DP-DS Color Light gray Black 107 M Connectors (8-Conductor Type) Printed Circuit Board Type GT17-8DP-DS BPanel Insertion Portion Dimensions GT17A-8DP-DS Key Configuration Key Configuration BMounted and fully mated connector assemblies Panel BRecommended PCB Mounting Pattern Board BRecommended Panel Cut-out Panel Board Board Part Number GT17-8DP-DS GT17A-8DP-DS CL No. 767-0001-9 767-0002-1 Material Brass (Center terminal) Phosphor bronze (Outer terminals) PBT (Housing) Color Light gray Black Key Configurations Direction of Cable Pull-off 1 2 Upward with respect to the mounting surface Packaging 1 1 108 GT17B-8DP-DS GT17C-8DP-DS BPanel Insertion Portion Dimensions Key Configuration Key Configuration BMounted and fully mated connector assemblies BRecommended PCB Mounting Pattern Board Panel BRecommended Panel Cut-out Panel Board Board Part Number GT17B-8DP-DS GT17C-8DP-DS CL No. 767-0020-3 767-0021-6 Material Brass (Center terminal) Phosphor bronze (Outer terminals) PBT (Housing) Color Light gray Black Key Configurations Direction of Cable Pull-off 3 4 Downward with respect to the mounting surface Packaging 1 1 109 F Connectors (10-Conductor Type) Insulator (used for both right-angle and straight types) Part Number GT17V-10DS-2C CL No. 767-0036-3 Material PBT Color Dark gray Packaging 1 Note: Applicable Cable will have an Insulator diameter of 0.7 to 1.3 mm. Outer terminals (Right Angle) Part Number GT17V-10DS-8CF CL No. 767-0037-6 Material Copper alloy Finish Tin plating Outer Diameter 7.5 to 8.0 mm Packaging 1 Note: The crimping conditions will differ depending on the construction and material of the cable. In view of this, please make arrangements to ascertain whether crimping is possible for each cable. Shield Cover (Right Angle) Part Number GT17V-10DS-SC CL No. 767-0038-9 Material Copper alloy Finish Tin plating Packaging 1 110 Housing (Right-angle Type) BShown with inserted retainer GT17V-10DS-HU GT17VA-10DS-HU Key Configuration Key Configuration Part Number CL No. Material Color GT17V-10DS-HU 767-0039-1 Light gray PBT GT17VA-10DS-HU 767-0040-0 PBT Black Note: Used with the separate retainer (GT17-10DS-R). Key Configurations 1 2 Packaging 1 1 Retainer (Right-angle Type) Part Number CL No. Material Color Packaging GT17V-10DS-R 767-0041-3 PBT Dark gray 1 Note: Applicable Cable will have an outside sheath diameter of 7.5 to 8.0 mm. 111 Outer terminals (Straight Type) Part Number CL No. Material Finish Packaging Outer Diameter GT17VS-10DS-8CF 767-0059-9 Copper alloy Tin plating 1 7.5 to 8.0 mm Note: The crimping conditions will differ depending on the construction and material of the cable. In view of this, please make arrangements to ascertain whether crimping is possible for each cable. Shield Cover (Straight Type) Part Number GT17VS-10DS-SC CL No. 767-0060-8 Material Copper alloy Finish Tin plating Packaging 1 Note: Applicable Cables will have an outside sheath diameter of 7.5 to 8.0 mm. Retainer (Straight Type) Part Number GT17VS-10DS-R CL No. 767-0063-6 Material PBT Color Dark gray Packaging 1 Note: Applicable Cables will have an outside sheath diameter of 7.5 to 8.0 mm. 112 Housing (Straight Type) BShown with inserted retainer GT17VS-10DS-HU GT17VSA-10DS-HU Key Configuration Key Configuration Part Number GT17VS-10DS-HU GT17VSA-10DS-HU CL No. 767-0061-0 767-0062-3 Material PBT PBT Color Light gray Black Key Configurations 1 2 Packaging 1 1 Note 1: Used with the separate retainer (GT17-10DS-R). Note 2: Applicable Cable will have an outside sheath diameter of 7.5 to 8.0 mm. BF Connector (10-Conductor Type) Composition Table Inner Terminal GT17-2022SCF GT17-2428SCF GT17-30SCF Housing Retainer GT17V-10DS-HU GT17V-10DS-R GT17V-10DS-8CF GT17V-10DS-SC GT17V A-10DS-HU GT17V-10DS-2C GT17VS-10DS-HU GT17VS-10DS-8CF GT17VS-10DS-SC GT17VS-10DS-R GT17VSA-10DS-HU Insulator Outer Terminal Shield Cover B10-Conductor Type Mating Table F Connector GT17V-10DS-HU GT17VS-10DS-HU GT17VA-10DS-HU GT17VSA-10DS-HU M Connector GT17V-10DP-DS GT17V-10DP-DSA GT17V-10DP-DS -SB GT17VA-10DP-DS GT17VA-10DP-DSA GT17VA-10P-DS-SB Color Light gray Black 113 M Connectors (10-Conductor Type) Printed Circuit Board Type (Right-angle Type) BRecommended Panel Cut-out GT17V-10DP-DS BPanel Insertion Portion Dimensions GT17VA-10DP-DS Key Configuration Key Configuration BRecommended PCB Mounting Pattern BMounted and fully mated connector assemblies Panel Board Panel Board BMounted and fully mated connector assemblies Panel Board Part Number GT17V-10DP-DS CL No. 767-0034-8 767-0035-0 Material Brass (Center terminal) Copper alloy (Outer terminals) PBT (Housing) Color Light gray Black Key Configurations Direction of Cable Pull-off 1 2 Upward with respect to the mounting surface Packaging 1 1 114 GT17VA-10DP-DS Printed Circuit Board Type (Straight Type) BRecommended Panel Cut-out GT17V-10DP-DSA BPanel Insertion Portion Dimensions GT17VA-10DP-DSA Key Configuration Key Configuration BRecommended PCB Mounting Pattern BMounted and fully mated connector assemblies Board Panel Board BMounted and fully mated connector assemblies Panel Board Part Number GT17V-10DP-DSA GT17VA-10DP-DSA CL No. 767-0067-7 767-0068-0 Material Brass (Center terminal) Copper alloy (Outer terminals) PBT (Housing) Color Light gray Black Key Configurations Direction of Cable Pull-off 1 2 Upward with respect to the mounting surface Packaging 1 1 115 Printed Circuit Board Type (Shield Reinforced Type) BRecommended Panel Cut-out GT17V-10DP-DS-SB GT17VA-10DP-DS-SB Panel Board Key Configuration Key Configuration BRecommended PCB Mounting Pattern BMounted and fully mated connector assemblies Board Panel Board Panel BMounted and fully mated connector assemblies Panel Board Part Number GT17V-10DP-DS-SB Panel CL No. 767-0069-2 767-0070-1 Material Brass (Center terminal) Copper alloy (Outer terminals) PBT (Housing) Brass (Shield) Color Light gray Black Key Configurations Direction of Cable Pull-off 1 2 Upward with respect to the mounting surface Packaging 1 1 116 GT17VA-10DP-DS-SB BWiring Method Strip the outside sheath. Outside shield Outside sheath GT17V-10DS-HU Harness Finish Insert the insulator into the Outer terminal. Outer terminal Cut the shield and intermediate material to expose the wire and braid. Drain wire Insert the Shield Cover. Shield Cover Signal wires Bend back the drain wire over the sheath. Fold back the Outer terminal. Drain wire Wrap with copper tape. Copper tape Crimp the Outer terminal. Strip the wire leads. Wire Insert the Outer terminal into the housing. Housing Crimp the center terminals. Center terminal Insert the retainer. Retainer Insert the center terminals into the insulator. Completion Insulated case 117 GT17VS-10DS-HU Harness Finish Insert the insulator into the Outer terminal. Insert the Outer terminal into the housing. Housing Outer terminal Crimp the Outer terminal. Insert the retainer. Retainer Insert the Shield Cover. Shield Cover Completion BTermination Tools User's manuals are available. Please ask your Hirose Electric account representative. BSpecifications Item Specification Stroke Length Number of strokes Weight Motor 1.5ton 30mm 200spm (50Hz) 75kg 0.2kW 2000 to 4000 pcs. per day AC100V 240spm (60Hz) Specification Remarks Automatic Crimping Machine Crimping speed Hand Press Part Number CM-105 * Crimp height setting tables are available for each cable type. Please contact your nearest Hirose Electric account representative. Different cables will require different crimp height settings. 118 |
Price & Availability of GT17VC-6DP-DS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |